RMI - REPAIR KITS
Fluid Applied Roofing System
The RMI roof repair kits consists of three distinct materials, a primer RMI-Prime to prepare the existing surface for maximum adhesion, a fluid applied membrane -RMI Flex and a liquid applied roof (wear surface) coating - RMI Thane.
- These new year-round roof repair kits are comprised of the same 30-year-old RMI system components found on our large commercial projects but without the55-gallon drum and custom spray equipment.
- Perfect for extreme weather repairs be it below freezing (32F) or extreme heat (180F).
- Sets up and waterproof in minutes/hours not days. Does not require reinforcements.
- RMI Flex has 100% solids and 0% VOC. No shrinkage, 100% memory. What you apply is what you get.
- 10-50-100 sq. ft. kits to mix and match your exact repair needs. Each kit contains just the right amount of RMI Primer, pre-measured RMI Flex (Parts A&B) and RMI Thane.
- REPAIR 10 (Sq. Ft.)
- RMI-Prime: ½ Pint (0.237L) (Fast dry additive not included)
- RMI-Flex Part A (ISO): ½ Pint (0.237L)
- RMI-Flex Part B (Resin) 1 Quart (0.946353L)
- RMI-Thane (Silver Surface Coating) 1 Pint (0.473L)
- Stir Sticks – Mil Thickness Gauges
- REPAIR 50 (Sq. Ft.)
- RMI-Prime: 1 Pint (0.473L) (Fast dry additive not included)
- RMI-Flex Part A (ISO) 1 Pint (0.473L)
- RMI-Flex Part B (Resin) 1 Gallon (3.8L)
- RMI-Thane (Silver Surface Coating) 2 Quart (.946L each)
- Stir Sticks – Mil Thickness Gauges
- REPAIR 100 (Sq. Ft.)
- RMI-Prime: 1 Quart (0.946353L) (Fast dry additive not included)
- RMI-Flex Part A (ISO) 2 Pints (0.473L) each
- RMI-Flex Part B (Resin) 2 Gallons (3.8L) each
- RMI-Thane (Silver Surface Coating) 1 Gallon (3.8L)
- Stir Sticks – Mil Thickness Gauges
RMI REPAIR KIT INSTALLATION SHEET PDF'S
SEEING IS BELIEVING
